Rudy King Reflects on His Half Century of Manufacturing Transformers at SPX Transformer Solutions

Rudy and Willie Pearsall - 1996


Rudy hard at work - 1987

 

Winning the pie eating contest at an employee
appreciation day event in 1997.

Fate, Destiny, Divine Intervention. These are just a few words that could explain how Rudy’s journey with SPX Transformer Solutions began almost 50 years ago.

In 1967, Rudy was serving as an Airborne Ranger/paratrooper in the United States Army. The intense action, physical endurance training, travel and adventure played into Rudy’s zest for life, but he yearned for all that excitement and extreme action MINUS the strict confines of the military. Therefore, throughout his service in Vietnam, he worked on a “game plan” for post-Army life.

Rudy set out on a personal letter-writing mission from Vietnam, reaching out to over 20 companies in his North Carolina hometown for employment. In these letters, Rudy expressed interest in a career after he exited the military. For all the letters sent, only one response was received — from Jim Pender, HR manager for Hevi-Duty/Sola Basic.

Jim’s response expressed thanks for Rudy’s military service and a sincere interest in meeting him. He eluded to the possibility of a career opportunity with Hevi-Duty if Rudy’s interest was sincere and asked Rudy to stop by the facility once he touched down in the U.S. to pick up an application. And that is exactly what Rudy did!

Rudy started with Hevi-Duty/Sola Basic on October 14, 1968, as a coil winder. Always inquisitive and driven to excellence, he set out to learn everything possible about winding. According to Rudy, “Al Charpner took me under his wing and taught me how to be the best winder I could be.” Rudy referenced a saying from Dr. Martin Luther King, Jr., “If you get a job as a ditch digger, be the Michelangelo of ditch digging.” Rudy says that is the attitude he takes when approaching every job, keeping him motivated.
Winding was cool, but Rudy yearned for more knowledge. He knew that more went into building a transformer than windings. So, he took it upon himself to learn everything he could about the entire process. Cleve Faison assisted Rudy in exploring test processes, and Gylfi Olafsson taught him all about the electrical side of the transformer, including creep and strike distances. In August 1999, Jeff Neiman approached Rudy with a promotion to a quality specialist position. And the Quality Department is where he remains today, as a senior quality specialist.

Rudy is a people person, and he loves how his job provides him the opportunity to interact with other employees and customers. Customers appreciate his knowledge and willingness to openly share that knowledge. Employees enjoy his light-hearted personality and appreciate his desire to assist them regardless of the task. In return, Rudy enjoys the camaraderie that has developed between his fellow team members and him. In fact, the outpouring of support earlier this year when his beloved wife, Lynell, passed away was the only thing that prevented Rudy from retiring. The support and concern from his SPX Transformer Solutions family made a world of difference during one of the toughest times of his life.

Rudy has seen and experienced many changes during his years at the company and has taken a measured approach throughout his career in dealing with change. “Change management can definitely be challenging,” said Rudy. “However, when changes are thoroughly explained, I can digest the information, absorb clear interpretation and understanding of the proposed change and then request clarification if needed.”
One of the most significant changes Rudy noted was the Goldsboro facility’s transition to building a totally different type of transformer. Moving from manufacturing small, dry-type transformers to medium and large, liquid-filled transformers was a HUGE change that did not occur without challenges. Another one that caused some heartburn was when the company announced the change from form clamps to flat clamps. Rudy sheepishly admitted that he resisted this particular change, but only in his mind. “I wanted to push back with all the reasons we shouldn’t mess with a good thing, but then I remembered my approach to change management and decided, ‘Okay, let’s give it a try.’ ” Now, after working through it, Rudy smiled and said, “It’s one of the best things the company has introduced. I am so glad we changed.”

As Rudy continued to reflect on his journey that took him from winder to senior quality specialist, his focus moved to proud moments and how he was able to remain injury-free for 49 years. With bright and wide eyes, Rudy said exuberantly, “Being injury-free for so long is something I take great pride in. I pay attention, evaluate my surroundings and always wear proper PPE for the task at hand. Oh, and I always look before I leap!” Rudy continued, “If I happen to notice a fellow employee engaging in an unsafe activity, I address the concern and offer alternative methods of working out the task in a safe manner.”

Rudy recalled another proud moment from June 2011, when he became the first employee to be personally nominated by then-SPX President, Chris Kearney, for the X-Factor Series published by the Corporate Communications Department in Charlotte. Rudy feels this recognition helped seal his reputation for excellence.

Rudy offered an abundance of advice for the generation following in his stead. “Come into the job open-minded, be willing to listen, have a desire to learn and, most of all, be coachable. Allow for constructive criticism and don’t take anything at work personally. No one is trying to run you down. In fact, we are all trying to make you successful.”

Outside of work, Rudy is quite the adventurer and outdoorsman. He spends his free time cycling, cross-country skiing and body building. He is also a martial artist who once participated in a competition with Bruce Lee and Chuck Norris in Seattle, Washington! Additionally, Rudy enjoys spending time with his grandson, Komari, who is a sophomore at Wayne School of Engineering.

Throughout his career, Rudy has been able to study and influence nearly every aspect of building a transformer. His cross-functional training and passion for learning has led him down a path of excellence that has benefited SPX Transformer Solutions for nearly a half century. And, according to Rudy, we won’t be losing his expertise for a while. “I am not planning on retiring anytime soon. Simply put: I love what I do — I LOVE my job!”

Thank you for all your heartfelt dedication and continued loyalty to SPX Transformer Solutions, Rudy! Your accomplishments and attention to detail and safety have not gone unnoticed, and we look forward to having you in your position for years to come.

Experience Waukesha
© 2017 SPX TRANSFORMER SOLUTIONS, INC.